Honor; the sub-brand of the Chinese giant Huawei has recently unveiled its new smartphone i.e., the Honor Play 4T Pro. This sports a 6.3 inches OLED display, the newer Kirin 810 SoC, 6 or 8GB of RAM, 128 or 256GB of storage, triple camera setup, 4000 mAh battery, and runs on Android 10. If you have bought this device and want to connect it to PC, which is obvious, then this post simply enables you to download the latest Honor Play 4T Pro USB Drivers for Windows 7, 8, and 10 very simple.

It is very necessary to have USB drivers whenever you have to connect Honor Play 4T Pro to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Honor Play 4T Pro manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Honor Play 4T Pro USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.

Honor Play 4T Pro Specifications: Overview

The Honor Play 4T Pro sports a 6.3 inches OLED display with a Full HD+ resolution, and an old waterdrop notch. It has an aspect ratio of 20:9, a pixel density of 419 Pixel Per Inch (PPI), a resolution of 1080 x 2400 pixels, and a screen to body ratio of 83.2 percent.

Coming to the internals of the Honor Play 4T Pro, it sports the HiSilicon Kirin 810 SoC, and this is built on the 7nm process. This octa-core SoC has two Cortex A76 cores that clock at 2.27GHz, and six Cortex A55 cores that clock at 1.88GHz. To the GPU side, it sports the Mali G52 MP6 GPU. The device runs on Magic UI 2.1, which is based on Android 10, i.e. (AOSP + HMS). Talking about the memory side, it comes with 6, and 8GB of RAM. Further, it comes with 128, and 256GB of UFS 2.1 internal storage. This onboard storage is also expandable via the nano memory card up to 256GB. The device has a hybrid SIM card slot.

Coming to the optics, the Honor Play 4T Pro sports a triple rear camera setup, which is arranged in a vertical manner inside a rectangle. This has a primary 48MP Sony IMX 586 sensor with an aperture value of f/1.8, EIS, and PDAF. Further, it gets an 8MP ultra wide-angle sensor with an aperture value of f/2.4.  Finally, it gets a 2MP depth sensor with f/2.4 aperture. This device also gets a LED flash and can take HDR and panorama shots. To the front, the device gets a 16MP sensor with an aperture value of f/2.0. The rear camera can shoot videos in 4K, while the front camera can only shoot in 1080p @ 30fp.

The Honor Play 4T Pro packs a 4,000 mAh battery that comes with support for 22.5W fast charging tech. It is available in three colors which are Black, Blue, and Green. Connectivity options include Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot. Bluetooth 5.0, A2DP, LE, GPS with A-GPS, GLONASS, BDS. And USB 2.0, Type-C 1.0 reversible connector, USB On-The-Go. Sensors onboard include accelerometer, proximity, and compass. Talking about the biometric options available, it has support for the in-display fingerprint sensor, and as well as support for face unlock.

Honor Play 4T Pro USB drivers

The USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Honor Play 4T Pro from your PC in case you have installed it. Once you are done, click the below link to download USB Drivers on your PC.

You must disconnect your device from the PC first. Next, download this .zip file and extract it. You may need to install an app from the Play Store to extract this file. You can proceed with any which are available in the Play store for this purpose. Once download double tap on the file and follow the instructions on the screen.

How to Install Honor Play 4T Pro Latest USB Drivers

You can download and install Honor Play 4T Pro USB Drivers on your PC without any issues. If you face any problem, then make sure to reach us via comment or mail. We will get in touch with you. Here is the complete guide to manually install Android USB drivers on your PC.

Honor Play 4T Pro ADB Fastboot Tool:

If you have bought this device and want to try some other custom ROM or recovery. Then you may need this ADB Fastboot driver on your PC. Though you have to Unlock Bootloader first, then this tool is really important. Download the ADB and Fastboot tool and Install it on your PC.

What is ADB?

ADB or Android Debug Bridge is a small debug tool that you will find in the Android Software Development Kit (SDK). It is basically a command-line tool that does the communication between your Android device and a computer. With ADB, your device can be controlled from the computer via USB, files can also be transferred, and it runs powerful shell commands. ADB can be used to send terminal commands to an Android device for changing the system level.

What is Fastboot:

Like ADB, Fastboot is also a part of SDK. The Fastboot tool could be helpful for reflashing partition and image files on your device. In a fastboot, system, the file system images can be modified from a computer over a USB connection. Like recovery, updates and zip files can also be installed from fastboot.

Instructions to Install:

You can install the ADB driver on both windows and mac. You can follow the below instructions to install ADB on both Windows and PC.

For Windows //// For Mac 

  • EMUI 9.1 Official Now: What’s New, Supported Huawei devices list, and Download
  • Huawei Android 11 Update: Supported device and EMUI 11 Features
  • EMUI 10 for Huawei and Honor: Android 10 base with Supported device list
  • List of Supported TWRP Recovery for Huawei Honor Devices
  • Download Huawei MTK Secure Boot Download Agent loader Files [MTK DA]
  • Huawei Honor VoWiFi supported device: WiFi calling feature coming soon
  • Honor Android 11 Update: Supported device and Magic UI 4.0 Features