In this tutorial, we will guide you on how to install the Samsung SM-A235M (Galaxy A23) Binary 1 U1 flash file using the Samsung flash tool (also known as the ODIN flash tool). On this page, you will find the official stock firmware file for the Samsung Galaxy A23 SM-A235M, drivers, and flash tool.
By flashing the Stock ROM file, you can always fix the device software issue such as boot loop, lag, soft brick or hard brick, remove pattern lock, FRP lock, and many more.
Also Read
How to Install Custom ROM on Samsung Galaxy A23 [GSI build]
Samsung Galaxy A23 SM-A235M U1 Firmware Flash Files:
Steps to Install Firmware File on Samsung A23 SM-A235M
Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy A23, let us take a look at the pre-requirements first.
Pre-Requirements:
- This Guide is for Samsung Galaxy A23 SM-A235M
- You need a Windows PC/Laptop and a USB cable to flash the firmware.
- Charge your device with a minimum of 50% battery backup.
- You have to download the latest Samsung USB Drivers and install them on your PC.
- Make sure that you have ODIN Software installed on your PC.
- Take a backup of your device (No Root) before doing anything.
Now, let’s take a look at the Steps to flash Stock ROM on Samsung Galaxy A23.
Installation Guide
- Download the Samsung SM-A235M firmware flash file
- Extract the contents of the firmware flash file zip.
- Launch the ODIN application
- Load the firmware files in their appropriate section
- Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
- Notice that the CO port will light up on Odin once you connect your phone.
- Click the Start button to install the firmware on your Samsung device.
- That’s it! You will see a PASS message once the installation is complete.
Check out our full-depth video guide as well.
Disclaimer:
We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.
