Samsung launched their Galaxy F22 successor called Galaxy F23 5G in India. The device features a triple rear camera and is powered by Qualcomm Snapdragon 750G SoC. The Samsung Galaxy F23 5G includes a 120Hz display, 25W fast charging support, and 12-band 5G connectivity.

On this page, we have shared the download link and guide to install the Samsung SM-E236B (Galaxy F23 5G) binary 1 U1 firmware flash file using the Samsung Flash Tool (Also known as Odin Flash Tool). Here you will find all stock firmware zip files for all the supported regions with Samsung SM-E236B.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Also Read

Is Samsung Galaxy F23 Waterproof Smartphone?

Samsung F23 SM-E236B FRP Bypass | Use EFT, CM2, UMT

Samsung Galaxy F23 Device Overview:

The Samsung Galaxy F23 features a 6.6-inch IPS LCD panel with a 120Hz refresh rate. It is an FHD+ panel with a resolution of 1080 x 2408 pixels and an aspect ratio of 20:9. Under the hood, we get the Qualcomm Snapdragon 750G built on an 8nm manufacturing process. It is an octa-core processor with two Kryo 570 cores clocked at 2.2 GHz and six Kryo 570 cores clocked at 1.8 GHz. For handling the graphics-intensive tasks, we have the Adreno 619.

In terms of optics, we get a triple camera setup at the rear and a single camera at the front. The triple camera setup at the rear features a 50 MP primary sensor paired with an f/1.8 lens, an 8 MP ultrawide sensor paired with an f/2.2 lens, and a 2 MP macro sensor paired with an f/2.4 lens. The single selfie camera is an 8MP sensor paired with an f/2.2 lens. Both the front and the rear setup is limited to 1080p video recording at 30 fps.

The smartphone comes in two storage options: 128GB + 4GB RAM and 128GB + 6GB RAM. There is a dedicated MicroSD slot for storage expansion. The smartphone comes with Android 12 out of the box with One UI 4.1 skin on top. In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, NFC, FM radio, and USB Type-C 2.0. And for sensors, we get a side-mounted fingerprint sensor, accelerometer, gyro, and compass. Powering it all is a 5000 mAh battery that supports 25W fast charging. The smartphone is available in two color options: Aqua Blue and Forest Green.

Samsung Galaxy F23 5G SM-E236B Flash Files:

Steps to Install Firmware File on Galaxy F23 5G SM-E236B

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy F23 5G, let us take a look at the pre-requirements first.

Will Samsung Galaxy F23 Get Android 13 (One UI 5.0) Update?

Pre-Requirements: 

  • This Guide is for Samsung Galaxy F23 5G SM-E236B
  • You need a Windows PC/Laptop and a USB cable to flash the firmware.
  • Charge your device with a minimum of 50% battery backup.
  • You have to download the latest Samsung USB Drivers and install them on your PC.
  • Make sure that you have ODIN Software installed on your PC.
  • Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at the Steps to flash the firmware file on Samsung Galaxy F23 5G.

Instructions to Install:

  • Download the Samsung SM-E236B flash file
  • Extract the contents of the firmware flash file zip.
  • Launch the ODIN application
  • Load the firmware files in their appropriate section
  • Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
  • Notice that the CO port will light up on Odin once you connect your phone.
  • Click the Start button to install the firmware on your Samsung device.
  • That’s it! You will see a PASS message once the installation is complete.

Check out our full-depth video guide as well.

Disclaimer:

Advertisement

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.