On this page, we have shared the download link and guide to install the Samsung SM-S908E (Galaxy S22 Ultra) binary 1 U1 firmware flash file using the Samsung Flash Tool (Also known as Odin Flash Tool). Here you will find all stock firmware zip files for all the supported regions with Samsung SM-S908E.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Also Read

Samsung Galaxy S22 Ultra Unlock Bootloader Guide | How to

Fix: Samsung Galaxy S22 Ultra Not Turning On

Samsung Galaxy S22 Ultra Battery Draining Fast, How to Improve Battery Life?

Fix Samsung Galaxy S22 Ultra WiFi Issue | Not Connecting, Slow or No Internet

Fix: Samsung Galaxy S22 Ultra Keeps Crashing

Fix Samsung Galaxy S22 Ultra Won’t Recognize SIM Card Issue

Will Samsung Galaxy S22 Ultra Get Android 13 (One UI 5.0) Update?

Fix: Samsung Galaxy S22, S22 Plus, and S22 Ultra GPS Problem or Not Accurate

How to Install Custom ROM on Samsung Galaxy S22 Ultra

Samsung Galaxy S22 Ultra SM-S908E Flash Files:

Steps to Install Firmware File on Galaxy S22 Ultra SM-S908E

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy S22 Ultra, let us take a look at the pre-requirements first.

Pre-Requirements: 

  • This Guide is for Samsung Galaxy S22 Ultra SM-S908E
  • You need a Windows PC/Laptop and a USB cable to flash the firmware.
  • Charge your device with a minimum of 50% battery backup.
  • You have to download the latest Samsung USB Drivers and install them on your PC.
  • Make sure that you have ODIN Software installed on your PC.
  • Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at the Steps to flash the firmware file on Samsung Galaxy S22 Ultra.

Instructions to Install:

  • Download the Samsung SM-S908E flash file
  • Extract the contents of the firmware flash file zip.
  • Launch the ODIN application
  • Load the firmware files in their appropriate section
  • Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
  • Notice that the CO port will light up on Odin once you connect your phone.
  • Click the Start button to install the firmware on your Samsung device.
  • That’s it! You will see a PASS message once the installation is complete.

Follow Complete Guidelines

Disclaimer:

Check out our full-depth video guide as well.

Advertisement

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.

Fix: Samsung S22 Ultra Not Recording Video, Lagging, or Bad Quality

How to Fix If Volume Button Not Working on Samsung Galaxy S22 Ultra

How to Fix Samsung S22 Ultra No Signal or Network Problem