Redmi Note 10 5G is a rebranded version of Poco M3 Pro 5G which was launched globally last month. The device is equipped with an octa-core MediaTek Dimensity 700 SoC, paired with 4GB of RAM, and 128GB UFS 2.2 storage. It runs on Android 11 based on MIUI 12.

Xiaomi finally started pushing their new major OS update, MIUI 13 for the Xiaomi Redmi Note 10 5G (camellian) based on Android 12. The update is now started rolling around the globe.

As per some reports, it is said to be rolling with build number V13.0.2.0.SKSMIXM for users around the globe. With this, Xiaomi has included the latest April 2022 Security patch which fixes many security bugs and vulnerabilities.

Redmi Note 10 5G Device Overview:

The Redmi Note 10 5G features a 6.5-inch IPS LCD panel with a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. It is a high refresh rate panel with a 90Hz refresh rate and is protected by Corning Gorilla Glass 3. Under the hood, we have the MediaTek Dimensity 700 5G chip built on a 7nm manufacturing process. It is an octa-core processor with two Cortex-A76 cores clocked at 2.2 GHz and six Cortex-A55 cores clocked at 2.0 GHz. For handling the graphics-intensive tasks, we have the Mali-G57 MC2.

Coming to the optics, we get a triple camera setup at the rear and a single camera at the front. The triple rear camera consists of a 48MP primary sensor paired with an f/1.8 lens, a 2MP macro sensor paired with an f/2.4 lens, and a 2MP depth sensor paired with an f/2.4 lens. At the front, we get an 8MP sensor paired with an f/2.0 lens. Both the front and the rear camera setup is limited to 1080p video recording.

The Redmi Note 10 5G has six storage options: 64GB internal storage + 4GB RAM, 128GB internal storage + 4GB RAM, 128GB internal storage + 6GB RAM, 128GB internal storage + 8GB RAM, 256GB internal storage + 4GB RAM, and 256GB internal storage + 8GB RAM.

In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.1, GPS, NFC, Infrared port, FM radio, and USB Type-C 2.0. And in terms of sensors, we get a side-mounted fingerprint sensor, accelerometer, gyro, proximity, and compass. Powering it all is a 5000 mAh battery that supports 18W fast charging.

Android 12 MIUI 13 Update Tracker:

Download Android 12 | MIUI 13 Update:

Steps to Install Android 12 on Xiaomi Redmi Note 10 5G

Before we get straight to the steps to flash the MIUI 13 update based on Android 12 on your Xiaomi Redmi Note 10 5G, let us take a look at the pre-requisites first.

Pre-Requirements: 

  • This Flash File is for Xiaomi Redmi Note 10 5G.
  • You should have a working Windows PC/Laptop
  • Download and Install the latest Xiaomi USB Driver for Windows and MAC.
  • Download and Install the Xiaomi Mi Flash tool on your PC (Fastboot Method)
  • Charge your phone to at least 50% before upgrading your phone.
  • Take a complete backup of your phone data

Now, let’s take a look at Steps to flash Stock ROM on Xiaomi Redmi Note 10 5G.

Instructions to Flash The ROM:

To install MIUI 13 Flash files on your Xiaomi Redmi Note 10 5G, we have given two methods, either you can follow the recovery method or you can follow the Fastboot method. A detailed guide on both methods is given down below:

Disclaimer:

Guide to Install MIUI ROM on Xiaomi Device [Recovery/Fastboot]

I hope you installed the Stock ROM on Xiaomi Redmi Note 10 5G (camellian) successfully, Now please rate this website with your comment. We always welcome feedback and improvements.

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.